When was the last time the roof of your building was inspected? If it has been been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs that are only detectable on the surface. In either case, leaving the problems unaddressed can cost you a small fortune when you finally repair them. If the roof on your building has any of the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels in place. This creates a space where water can leak underneath the panels and soak the roof deck. Once the deck becomes saturated, the problem is costly to fix.
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, hot weather typically makes them worse. Due to the humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.
Blocked drains and improper sloping can cause water to gather in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more complex. Often, installing a taper insulation system to establish a new slope is the best solution. During the rainy season, resolving ponding water is one of the most common types of roof repair.
Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. Over time, most flashing must be resealed. If it is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Chimneys and high parts of brick walls that have sections of missing mortar may cause leaks. These leaks are often mistaken for leaks in the roof membrane, but a thorough inspection by a company that specializes in commercial roofing will reveal the true problem. Most sections of missing mortar can be repaired with basic tuck pointing procedures.
The problems above are some of the most common reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the best way to ensure problems are detected early.