Most people are aware of the potential of solar energy technology, but many homeowners are not precisely sure what the process entails. We are going to assume that you get adequate sun exposure where you live. This is important in order to justify the investment necessary for solar energy technology.
If you live where frequent clouds affect the intensity of the direct rays of the sun, then any possible payoff could take longer. When getting enough sun is going to be a challenge, you might consider an alternative like wind energy.
After you test to ensure your location receives enough sunlight, the next step is to determine which types of solar panels will work best for your home. The two most popular types of solar panels are tilted panels or flush panels. In order to install these panels, you must ensure alignment of the panels with the roof slant.
Installation varies depending on the particular shape of your roof. If your home’s roof is flat, it is wiser to install the panels with a slight tilt. It is also important to note that a completely flat solar panel installation will likely collect debris like dust, rainwater,dirt, dead insects, and other types of build-up. It goes without saying that these things can affect the efficiency of your installation.
Solar energy installation
There’s no need to worry if your particular roof is well-suited to solar energy technology. Efficient solar power for homes does not depend on the roof type. Solar energy technology can accommodate any type of roof. The right solar panel to suit your needs can easily be found.
In most cases, with solar panels, you simply attach the necessary posts or brackets using stainless steel bolts or screws. It needs to be strong and sturdy enough to fasten to the joists or rafters. Most handy homeowners can usually follow the directions for safe and effective installation.
To err on the side of caution, you can employ solar specialists for the installation to ensure the utmost of safety and professionalism. However, if you are fairly handy around the house, you can also learn solar panel installation. First, you attach a long rail on the brackets, then gently slide the panels into place. If your roof has an unusual tilt or a steep pitch angle, this could prove challenging.
You also need to be careful in case the initial construction on your roof utilized non-traditional building methods. However, solutions to most problems can usually be found.
Some homeowners opt to start small and scale up. One can evaluate the total cost of the investment and measure it against the potential future savings. Solar energy technology shouldn’t be seen as an expense. It is more of an investment that pays off, not only in your bank balance, but with the environment too. Renewable energy awareness is important for the future of the planet.
Some homeowners delay utilizing solar energy technology because they simply don’t understand it. We will explain and clarify in greater detail in the next section below.
Understanding solar energy technology
An individual photovoltaic module (PV) produces a small amount of power. Accordingly, installation of home solar power requires several panels to generate sufficient power. Several panels used in conjunction, make up a photovoltaic array. The solar panels are arranged in a grid structure and using the aforementioned rails makes the process easier. During the installation process, you should try attaching the panels to one another, in addition to the brackets or rail. It is important in order to ensure enough strength and stability to withstand any harsh wind or weather.
Solar collector panels need supplementary connections to facilitate the return and supply feeds accordingly. The collector panels absorb the sun’s energy for the PV modules to convert the solar radiation into the electricity that powers your home. After the panels are attached, you can then affix a trunk or conduit. This will connect the panels to a component called an inverter. This allows the PV panels direct current (DC) to be converted into the alternating current (AC) required for home use.
As with most installations, double-check everything and properly go over the home installation kit. Additional weather proofing is also highly recommended. Implementing solar energy technology may change the entire way you see electricity. This can be a very enlightening experience.