GRP is the short form of the Glassfibre Reinforced Plastics moldings. This product is also known as the fiberglass moulding as well as the composite plastic. In the United States, the product is called as the FRP. The use of the GRP is increasing with time. There are several reasons behind this growing trend. However, one of the most obvious factors is that the GRP is an unbelievably versatile product. In fact, the use of this material is not fully understood even by the experts. Therefore, one can easily understand how extensively the GRP can be used in different industries.
No wonder, GRP is used in a number of constructions even when it comes to construction of Cycle shelters. For example, these molded sheets are used these days in canopies, and even in the GRP buildings. There are several advantages of using the GRP moulding. For example, they can be manufactured in unlimited shades and colors. At the same time, these sheets can be manufactured in a way that the surface texture can be varied as well. So, you have a lot of choice and your construction can be given a different look or style with the help of these sheets as well.
Several options are also available in terms of the architectural moldings. For example, the dormers can be insulated with the help of encapsulated timber or foam studding. This will enable the builder to insulate and fix the internal linings himself. In fact, some of the GRP products can be fixed to the roof trusses even before the roof covering. Also, the method of installing the GRP mouldings is easy and it saves a lot of time. So, you can close off the open roof space very quickly. This is certainly an added advantage if you live in a wet climate. At the same time, using the GRP will save a considerable amount of money for you as well. This is even more true since a few tools are used here for multiple purposes.
However, you need to be careful about certain factors here. For, the GRP molded sheets and products need some types of tools or former from which it can be molded. In the simplest form, the GRP is known as the hand lay. At the initial stage, the mould is prepared with the release wax. This is very much similar to the car polish. After that, the color is applied with the help of brush or spray. The application is similar to gelcoat. Basically, this is a colored and thickened resin. After that, the color is left for 20 minutes to cure. Then, the glassfibre is applied with the resin.